5.00/1 Customer Review 
Emergi-lite JS Series Emergency Light product variations
Emergency Lights
An emergency light is a lighting device with a battery backup that switches on automatically when a building experiences a power outage. Emergency lights are standard in commercial and high occupancy residential buildings, such as college dormitories. Most building codes require emergency lighting be installed in older buildings as well.
White
The main housing of these exit signs and emergency lights is painted white or made from a white thermoplastic.
Black
The main housing of these exit signs and emergency lights is painted black or made from a black thermoplastic.
Sealed Lead Acid (SLA)
Sealed lead acid batteries are sometimes referred to as VRLA (valve regulated lead acid) and there are two primary types AGM and Gel. We offer both AGM and Gel batteries, each has its advantages over the other depending on the specific application. SLA batteries usually last between 3 to 5 years with typical usage. The optimum operating temperature for the lead-acid battery is 25°C (77°F). Elevated temperature reduces longevity. As a guideline, every 8°C (15°F) rise in temperature cuts the battery life in half.
Nickel-Cadmium (NiCd)
The nickel–cadmium battery is a type of rechargeable battery using nickel oxide hydroxide and metallic cadmium as electrodes. The abbreviation NiCd is derived from the chemical symbols of nickel and cadmium. NiCd batteries have a longer shelf life of around 10 years. The NiCd batteries sold on this site are High Temperature NiCds batteries with outstanding charge/discharge characteristics at both room temperature and high temperature up to 70°C (158°F).
Warning: Batteries, battery terminals, and related accessories can expose you to chemicals including Cadmium and Cadmium compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.
6 Volt
6 volt rechargeable batteries are a type of battery that can be recharged and used multiple times. They are commonly used for devices that require a low voltage and a high current, such as game feeders, lanterns, emergency lights, and electric signs. 6 volt rechargeable batteries have several advantages over disposable batteries, such as saving money, reducing waste, and preventing short-circuiting.
There are different types of 6 volt rechargeable batteries, such as Sealed Lead Acid (SLA), lithium iron phosphate (LiFePO4), nickel metal hydride (NiMH) and Nickel-Cadmium (NiCD). Each type has its own characteristics, such as capacity, cycle life, weight, and price. For example, SLA batteries are cheap and durable, but heavy and bulky. LiFePO4 batteries are lightweight and long-lasting, but expensive and sensitive to overcharging. NiMH batteries are eco-friendly and high-performance, but prone to self-discharge and memory effect. Depending on the application and preference, users can choose the best type of 6 volt rechargeable battery for their needs.
12 Volt
Rechargeable batteries are batteries that can be recharged and reused multiple times. They are more environmentally friendly and cost-effective than disposable batteries. One of the most common types of rechargeable batteries is the 12 volt battery, which is often used in backup power supplies, LED lights, CCTV cameras, and other devices that require a steady and reliable power source.
12 volt rechargeable batteries come in different sizes, capacities, and chemistries. Some of the most popular chemistries are sealed lead acid (SLA), lithium ion (Li-ion), and lithium iron phosphate (LiFePO4). Each chemistry has its own advantages and disadvantages, such as weight, lifespan, performance, and safety. For example, SLA batteries are heavy and have a short cycle life, but they are cheap and easy to maintain. Li-ion batteries are light and have a high energy density, but they are expensive and prone to overheating. LiFePO4 batteries are stable and have a long cycle life, but they are costly and have a lower voltage than other lithium batteries.
Damp Location
A damp location is an interior location normally subject to dampness or condensation, or an exterior location protected from weather and not subject to saturation with water. Damp locations include over bathtubs, indoor pools, covered porches, and like locations.
New York City Approved
New York City has very specific codes regarding emergency lighting and signage. In short New York City approved exit signs must be Red 8 inch tall letters with a 1 inch stroke (line thickness) as opposed to 6 inch tall with a 3/4 inch stroke in typical exit signs.
LED Lighting
Visibility, brightness and long life are very important factors that should be thought about when purchasing and exit sign. Light emitting diode or LED exit signs & emergency lights have proven to be successful in the reducing electricity consumption by up to 85%. LED exit signs can save money and power while still emitting considerable amounts of light.
Battery Backup
An emergency light with battery backup capability switches to emergency operation in the event of a power loss to illuminate escape routes and safety equipment.
Surface/Wall Mount
Exit signs & emergency lights that are surface mountable are typically one sided and have a back plate that can be connected directly to a wall or flat surface.
Steel
Steel emergency lights and exit signs are designed to provide illumination and guidance in case of a power outage or an emergency situation. They are typically used in applications where steel housing is required for durability, protection, or aesthetics.
Some examples of where to use steel emergency lights and exit signs are:
Offices, factories, and warehouses: These places may have harsh environments or heavy machinery that can damage plastic or aluminum fixtures. Steel emergency lights and exit signs can withstand impacts, vibrations, and corrosion better than other materials.